Σχεδίαση και κατασκευή συσκευής ελέγχου καλωδιώσεων δικτύου(UTP, FTP)με ανάλυση των αποτελεσμάτων σε κινητό τηλέφωνο (Bachelor thesis)

Καλλιοντζής, Δημήτριος


The aim of the thesis is the design and implementation of a twisted-pair cable tester, capable of sending results to a mobile phone. Twisted-pair cables exist in almost every wired computer network built over the last 25 years. This type of testers is widely used by computer network engineers and technicians, when installing a new network structured cabling or troubleshooting existing networks. The first four chapters are referred to the basic concepts of computer networks, different types and protocols of networks and the devices used in them. In the fifth chapter there is a historical review of the technological evolution of networks and wiring until the establishment of the Ethernet standard and the use of twisted pair cables through structured cabling. The various types of twisted pair cables used in the Ethernet standard and how they work are then analyzed, while the sixth chapter analyzes the categories of control devices for such cables. Last chapters analyze circuit and board design, circuit and mobile application programming, and how electronic materials are selected. Finally, there is a chapter with suggestions for improving the device that was built.
Alternative title / Subtitle: Design and implementation of a network cable tester(UTP, FTP)capable of analyze results on a mobile phone
Institution and School/Department of submitter: Σχολή Τεχνολογικών Εφαρμογών / Τμήμα Ηλεκτρονικών Μηχανικών
Keywords: καλώδια συνεστραμμένων ζευγών;αποστολή δεδομένων ελέγχου;κινητό τηλέφωνο;πρωτόκολλα δικτύων;σχεδιασμός πλακέτας
Description: Πτυχιακή εργασία--ΣΤΕΦ-Τμήμα Ηλεκτρονικών Μηχανικών,2018--αα10641
URI: http://195.251.240.227/jspui/handle/123456789/11957
Item type: bachelorThesis
General Description / Additional Comments: Πτυχιακή εργασία
Submission Date: 2020-05-03T14:45:05Z
Item language: el
Item access scheme: free
Institution and School/Department of submitter: Σχολή Τεχνολογικών Εφαρμογών / Τμήμα Ηλεκτρονικών Μηχανικών
Publication date: 2018-12-19
Bibliographic citation: Καλλιοντζής, Δ.(2018).Σχεδίαση και κατασκευή συσκευής ελέγχου καλωδιώσεων δικτύου(UTP, FTP)με ανάλυση των αποτελεσμάτων σε κινητό τηλέφωνο(Πτυχιακή εργασία).Αλεξάνδρειο ΤΕΙ,Θεσσαλονίκη.
Abstract: Σκοπός της πτυχιακής εργασίας είναι η μελέτη, σχεδίαση και κατασκευή ενός οργάνου ελέγχου καλωδίων συνεστραμμένων ζευγών δικτύωσης, με δυνατότητα αποστολής των δεδομένων ελέγχου που πραγματοποιεί σε κινητό τηλέφωνο. Καλώδια συνεστραμμένων ζευγών υπάρχουν σχεδόν σε κάθε ενσύρματο δίκτυο υπολογιστών που κατασκευάστηκε τα τελευταία 25 χρόνια. Όργανα τέτοιου τύπου χρησιμοποιούνται ευρέως από μηχανικούς και τεχνικούς δικτύων υπολογιστών, κατά την εγκατάσταση καλωδίωσης ενός νέου δικτύου ή την αντιμετώπιση προβλημάτων σε υπάρχοντα δίκτυα. Στα πρώτα τέσσερα κεφάλαια γίνεται αναφορά στις βασικές έννοιες των δικτύων υπολογιστών, τα διαφορετικά είδη και πρωτόκολλα δικτύων καθώς και τις συσκευές που χρησιμοποιούνται σε αυτά. Στο πέμπτο κεφάλαιο γίνεται μία ιστορική αναδρομή στην τεχνολογική εξέλιξη των δικτύων και των καλωδιώσεων έως ότου καθιερωθεί το γνωστό πρότυπο Ethernet και η χρήση καλωδίων συνεστραμμένων ζευγών μέσω δομημένης καλωδίωσης. Στη συνέχεια αναλύονται τα διάφορα είδη καλωδίων συνεστραμμένων ζευγών που χρησιμοποιούνται στο πρότυπο Ethernet και ο τρόπος λειτουργίας τους, ενώ στο έκτο κεφάλαιο αναλύονται οι κατηγορίες οργάνων ελέγχου τέτοιων καλωδίων. Στα τελευταία κεφάλαια αναλύονται ο σχεδιασμός του κυκλώματος και της πλακέτας, ο προγραμματισμός του κυκλώματος και της εφαρμογής για κινητό τηλέφωνο και ο τρόπος λειτουργίας των ηλεκτρονικών υλικών που επιλέχθηκαν. Τέλος παρατίθεται ένα κεφάλαιο με προτάσεις βελτίωσης της συσκευής που κατασκευάστηκε.
The aim of the thesis is the design and implementation of a twisted-pair cable tester, capable of sending results to a mobile phone. Twisted-pair cables exist in almost every wired computer network built over the last 25 years. This type of testers is widely used by computer network engineers and technicians, when installing a new network structured cabling or troubleshooting existing networks. The first four chapters are referred to the basic concepts of computer networks, different types and protocols of networks and the devices used in them. In the fifth chapter there is a historical review of the technological evolution of networks and wiring until the establishment of the Ethernet standard and the use of twisted pair cables through structured cabling. The various types of twisted pair cables used in the Ethernet standard and how they work are then analyzed, while the sixth chapter analyzes the categories of control devices for such cables. Last chapters analyze circuit and board design, circuit and mobile application programming, and how electronic materials are selected. Finally, there is a chapter with suggestions for improving the device that was built.
Advisor name: Γιακουμής, Άγγελος
Examining committee: Γιακουμής, Άγγελος
Publishing department/division: Σχολή Τεχνολογικών Εφαρμογών. Τμήμα Ηλεκτρονικών Μηχανικών
Publishing institution: teithe
Number of pages: 152σ.
Appears in Collections:Πτυχιακές Εργασίες

Files in This Item:
File Description SizeFormat 
Kalliontzis.pdf7.4 MBAdobe PDFView/Open



 Please use this identifier to cite or link to this item:
http://195.251.240.227/jspui/handle/123456789/11957
  This item is a favorite for 0 people.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.